Weekend 6 Summary

It is Easter weekend, I was able to finished insulating the sides of the bus with rigid foam board and fiberglass insulation. I also wrapped up the strapping around all the windows and doors with the 3/4 inch plywood. Ive been using with the Maple finish. I need a ton of plywood to complete the walls, but first I need to get some wire and ensure all my outlets can reach the breaker box.

I started to frame out the master bedrooms bed. It’s 30 inches off the ground, this will accommodate a nice sized fresh water tanks, water pump, and my solar/shore power solutions. Im starting to get into the expensive stuff.

Now that the front and rear furnishings are framed, I can see the space I have left in the middle of the bus for the kitchen and bathroom. I also removed some outlets and will be placing them higher up for the bedroom and the kitchen areas since the counter tops and wall extend up to the middle of the windows, it should be easy to find the right space for these outlets.

If I do get the opportunity to take this beast out for a maiden voyage, I will likely just utilize a pressure cooker, airfryer, and microwave while I save up for real appliances. I may invest in an electric Cooler as well as a temporary solution. But that is a long ways off right now, a lot of paperwork and hurdles to jump through first